Paving is ordered by the square metre and laid in layers: a compacted base, a thin bed of sand, the pavers, and sand brushed into the joints, held in by edging. The calculator works out each layer for a path, patio or home driveway, so you can compare quotes that are priced in different ways.
How the calculator works
The area times the pavers in a square metre, plus an allowance for cuts: about 50 a m² for 200 x 100 mm cement pavers, about 42 for 222 x 106 mm clay pavers, about 40 for interlocking zigzag pavers and 100 for 100 x 100 mm cobbles. Herringbone, curves and lots of edges waste more, so allow 7 to 10%. Pavers usually come about 10 m² to a pallet.
Under the pavers it allows a 25 mm layer of bedding sand (0.03 m³ a m² before compaction) and a compacted base, about 100 mm for paths and patios and 150 mm for a driveway that carries cars and bakkies, with 30% added for compaction. Edging is the perimeter, assuming every side is open; take off sides that run against a wall.
What paving costs
From 2026 South African guides, supplied and laid paving costs about R300 to R550 a m² for cement pavers, R400 to R650 for interlocking pavers and R550 to R800 for clay pavers. Labour alone is often about R80 to R150 a m², plus R40 to R180 a m² for digging out and the base. The ground decides much of the price: clay soil, poor drainage, slopes and trucks all need a deeper base.
Getting quotes you can compare
- Ask whether the price includes digging out, carting the soil away, the base, edging, cutting and the joint sand.
- Ask the base depth and material, and whether it is compacted in layers with a plate compactor.
- For a driveway, ask for pavers of 60 mm or thicker, and the strength (SANS 1058 for concrete paving blocks).
- Check the falls: water must run off to a drain or garden, not to the house.
See paving bricks, paving contractors and interlocking bricks.