Most brick orders start with one sum: the area of the wall times the bricks in a square metre, plus a little for breakage. The calculator does that for standard bricks, maxi bricks and M140 and M90 hollow blocks, then adds what the takeoff usually forgets: the cement and building sand to lay them, and how many pallets will arrive on the truck.
How the calculator works
It multiplies the length by the height, takes off the doors and windows, and multiplies what is left by the bricks or blocks in one square metre of wall with 10 mm mortar joints: about 52 standard bricks (222 x 106 x 73 mm), 33 maxi bricks (290 x 140 x 90 mm) or 12.5 blocks (390 x 190 mm face). A double skin (one brick thick) wall takes twice the bricks. Then it adds your allowance for breakage and cuts, 5% unless you change it, and rounds up.
The mortar comes from South African cement mix tables. For general walling above ground, a mix of one 50 kg bag of cement to three wheelbarrows of building sand lays about 1,000 standard bricks with 3 bags of cement and 0.6 m³ of sand. A stronger mix of one bag to two wheelbarrows, used below ground and for retaining and heavily loaded walls, takes about 4 bags and 0.55 m³. Maxi bricks and blocks have bigger joints, so the calculator scales the mortar by the volume of the bed and end joints of each unit.
A worked example
A 10 m long, 2.4 m high single skin wall with one door and a window (about 2 m² together) is 22 m² of brickwork. At 52 bricks a m² that is 1,144 bricks, and with 5% extra about 1,202: three pallets of 500 if the yard packs them that way. Laying them takes about 4 bags of cement and 0.72 m³ of building sand. The same wall in maxi bricks needs about 763 maxis, and in M140 blocks about 289 blocks.
Before you order
- Ask how the yard sells. Bricks are priced per brick, per 1,000 or per pallet, and pallets are not all the same size. Check the count on the pallet and whether delivery and offloading are included.
- Check the size. A "maxi" from one yard is not always the same as another's, and M140 blocks come 190 mm or 170 mm high. Enter the yard's own bricks per m² in your request if it differs.
- Check the strength. Load-bearing walls in houses usually need bricks of at least 7 MPa; ask for the test certificate (SANS 1215 for concrete bricks and blocks, SANS 227 for clay).
- Plaster is extra. The calculator counts mortar for laying only. Plastering both sides of a wall needs its own sand and cement.
See bricks, maxi bricks, concrete blocks, building sand and bricklayers.